Your Cart


All orders are processed in USD. While the content of your cart is currently displayed in CYN, you will checkout using USD at the most current exchange rate.

Out of stock

Some items are no longer available. Your cart has been updated.

Have a Coupon code?
Coupon code applied will be stored on your account

This discount code cannot be used in conjunction with other promotional or discounted offer.

Taxes and shipping calculated at checkout
Enjoy Free Express Shipping on orders over $29
You have items in your cart
Cart subtotal
View cart

ZK-660 Boot Handle Camera For BMW 3 Series E90 E91 E92 E93 5 Series E60 E61 X1 X5 X6 181951

Sale price USD $15.00 Regular price

Order summary

ZK-660 Boot Handle Camera For BMW 3 Series E90 E91 E92 E93 5 Series E60 E61 X1 X5 X6
Have a Coupon code?
Coupon code applied will be stored on your account

Shipping calculated at checkout.


Buy With


BMW 1 Series [E81 E82 E87 E88] (2004-2010)
BMW 3 Series [E90 E91 E92 E93] (2004-2016)
BMW 5 Series [E60 E61] (2003-2010)
BMW X1 [E84] (2009-2015)
BMW X5 [E70] (2006-2013)
BMW X6 [E71 E72] (2008-2014) 

SIZE: 110mm x 40mm

Important Note and Advice:

1. We strongly recommend you cross reference the details in the description against your vehicle to ensure the item is suitable for your vehicle.
2. Please make sure your car trunk handle has trunk opener switch.
Please check your trunk handle is the same size as the camera handle size is: 113mm Width*50mm Height.
Please check if the 2 installation screws position are the same and the distance between screws is: 72mm.
3. The camera will fit the following car models:
- For VW/Audi car installed with aftermarket stereo
(Plug and play, no camera decoder needed at all)
- For VW/Audi car installed with OEM car stereo
(NOT direct plug and play, your car must be installed with a camera decoder before.
Very Important! We do not provide such decoder)

Installation Steps:

1. First remove the battery power supply cable from the vehicle and place the removed cable away from the electrodes
to prevent the power from being connected by accident.
2. Remove the original car trunk handle, install the camera, adjust the camera position to achieve the best rear
viewing angle, snap the camera handle in place and fasten the screws.
3. Connect the power cable of the camera to the power cable of the reversing light, then connect the video cable of the
camera to the video extension cable, connect the other end of the video extension cable to the rear view camera input of
the car stereo, and connect both the yellow reverse control cables from the camera and from your car stereo to your reverse
gear positive pole.
4. Restore the battery power supply, start the car, put your car in reverse gear, and you can see the reversing image
on the car stereo.



- Type: Car Rear View Camera
- Sensor: 720P 1/4.2 CMOS
- Effective Pixels: 1280(H) x 720(V) pixels
- Video Output: 1.0 Vp-p / 75Ω
- Frame Rate: AHD 720P 25fps
- Noise Reduction: 3DNR / 2DNR
- Gamma Correction: 0.45
- SNR: >52dB (AGC OFF)
- Lens Angle: 140 degree
- Working Voltage: DC 3.3V-5V
- Working Current: 80mA
- Power: 0.25W (U=3.3V)
- Operating Temperature: -30℃~+70℃
- Storage Temperature: < RH75%
- Waterproof: IP68
- RCA Video Cable: 6M
- Automatic White Balance: Yes
- AGC (Automatic Gain Control) : Yes
- BLC (Back Light Control) : Yes
- Body Size: 113mm*50mm
- Shipping Weight: 280g

Parcel Content:

- 1 * BMW Car Trunk Handle Rear View Camera
- 1 * 6M RCA Video Cable
- 1 * Car Rear View Camera Filter


View Full Details