Some items are no longer available. Your cart has been updated.
This discount code cannot be used in conjunction with other promotional or discounted offer.
Your cart is empty.
Sale price USD $8.00 Regular price
ZK-150 Rear Reverse Camera Number Plate Light For Ford Fiesta Focus Mondeo Galaxy Kuga
1. High Quality Image Rear Camera:
3D night vision function is equipped, and it is clearly visible in low light conditions. High resolution, and excellent color effect.
2. Easy to Install:
Can be installed at the trunk buckle for Volkswagen Audi, etc. Perfect replacement, no need to change or damage the original appearance of the car.
3. Car Rear View Camera Filter:
Come with a car rearview camera rectifier, prevent distortion from your car rear view camera going away, and make the video picture in the rear view camera more clearly.
We have this product listed out as being tried and fitted with variants of the vehicles listed below.
We strongly recommend you cross reference the details in the description against your vehicle to ensure
the item is suitable for your vehicle.
Compatible with the following car models:
Ford C-MAX [MK2 C344] (2010-2019)
Ford Ecosport [MK2] (2013-2021)
Ford Fiesta [MK6 MK7 MK8] (2008-2021)
Ford Focus [MK2 C307 Facelift] (2008-2011)
Ford Galaxy [MK3 CD340 MK4 CD390] (2006-2020)
Ford Kuga [MK1 C394 MK2 C520] (2008-2019)
Ford Mondeo [MK4] (2007-2014)
Ford Ranger [MK3] (2011-2021)
Ford S-MAX [MK1] (2006-2014)
Ford Transit Custom [MK1] (2013-On)
SIZE: 58mm x 25.3mm
Important Note and Advice:
1. We strongly recommend you cross reference the details in the description against your vehicle to ensure the item is suitable for your vehicle.
2. Please make sure your car trunk handle has trunk opener switch.
Please check your trunk handle is the same size as the camera handle size is: 113mm Width*50mm Height.
Please check if the 2 installation screws position are the same and the distance between screws is: 72mm.
3. The camera will fit the following car models:
- For VW/Audi car installed with aftermarket stereo
(Plug and play, no camera decoder needed at all)
- For VW/Audi car installed with OEM car stereo
(NOT direct plug and play, your car must be installed with a camera decoder before.
Very Important! We do not provide such decoder)
1. First remove the battery power supply cable from the vehicle and place the removed cable away from the electrodes
to prevent the power from being connected by accident.
2. Remove the original car trunk handle, install the camera, adjust the camera position to achieve the best rear
viewing angle, snap the camera handle in place and fasten the screws.
3. Connect the power cable of the camera to the power cable of the reversing light, then connect the video cable of the
camera to the video extension cable, connect the other end of the video extension cable to the rear view camera input of
the car stereo, and connect both the yellow reverse control cables from the camera and from your car stereo to your reverse
gear positive pole.
4. Restore the battery power supply, start the car, put your car in reverse gear, and you can see the reversing image
on the car stereo.
- Type: Car Rear View Camera
- Sensor: 720P 1/4.2 CMOS
- Effective Pixels: 1280(H) x 720(V) pixels
- Video Output: 1.0 Vp-p / 75Ω
- Frame Rate: AHD 720P 25fps
- Noise Reduction: 3DNR / 2DNR
- Gamma Correction: 0.45
- SNR: >52dB (AGC OFF)
- Lens Angle: 140 degree
- Working Voltage: DC 3.3V-5V
- Working Current: 80mA
- Power: 0.25W (U=3.3V)
- Operating Temperature: -30℃~+70℃
- Storage Temperature: < RH75%
- Waterproof: IP68
- RCA Video Cable: 6M
- Automatic White Balance: Yes
- AGC (Automatic Gain Control) : Yes
- BLC (Back Light Control) : Yes
- Body Size: 113mm*50mm
- Shipping Weight: 280g
- 1 * Car Rear View Camera
- 1 * 6M RCA Video Cable
- 1 * Car Rear View Camera Filter